None of my 3 trucks and 1 car run but I keep looking at tires, rims, seats, 6.0 swap... CL is a bad gateway.
Must get truck running before I look for seats and rims.... but....$320 http://phoenix.craigslist.org/evl/pts/4503828122.html
FORUM ARCHIVE — READ ONLY
Read-Only Archive — 68,067 posts · 4,889 threads · 2,978 members · preserved from 2006–2015
I have a parts problem
Jun 05, 2014 08:28 PM #1
Hello my name is Robert Paulson and I have a parts buying problem.
None of my 3 trucks and 1 car run but I keep looking at tires, rims, seats, 6.0 swap... CL is a bad gateway.
Must get truck running before I look for seats and rims.... but....$320 http://phoenix.craigslist.org/evl/pts/4503828122.html
None of my 3 trucks and 1 car run but I keep looking at tires, rims, seats, 6.0 swap... CL is a bad gateway.
Must get truck running before I look for seats and rims.... but....$320 http://phoenix.craigslist.org/evl/pts/4503828122.html
Jun 05, 2014 09:20 PM #2
I like those. heck of a price considering they have good Michelins too
Jun 05, 2014 09:36 PM #3
Yeah. I was looking for seats and some other int trim parts when I found them.
Need to fix the Dodge first. Then the Chevy and all its little parts.
Need to fix the Dodge first. Then the Chevy and all its little parts.
Jun 05, 2014 10:07 PM #4
What exactly is the Dodge doing/not doing?
Jun 05, 2014 10:23 PM #5
Bad bad miss. I think its the evap can. I have one ordered. If not it needed it anyway.
Feels like a vac leak and or a plug wire off but I looked and cant see anything. Driving down the road it will shudder like a paint shaker but if you get on it, it will run fine.
Feels like a vac leak and or a plug wire off but I looked and cant see anything. Driving down the road it will shudder like a paint shaker but if you get on it, it will run fine.
Jun 05, 2014 11:35 PM #6
Weird. I say new motor..
Jun 06, 2014 02:56 PM #7
Any codes on the dodge? Have you cleaned the throttle body and tps?
Jun 06, 2014 03:25 PM #8
Yes there are. I will get them checked again.
No I havent cleaned anything yet
No I havent cleaned anything yet
Jun 08, 2014 02:45 PM #9
you should buy a jeep
Jun 09, 2014 04:21 PM #10
Parts showed up on Sat. I will be adding them tues or wed. Hope its as simple as that.
Jun 12, 2014 01:37 AM #11
Got the evap can on. It helped. Cleaned everything. New air filter. Still a paint shaker. Going to let it cool off then crawl under it and tighten everything up
Jun 12, 2014 03:20 PM #12
Did you replace that missing tranny mount bolt?
Jun 12, 2014 03:38 PM #13
Shhhhhhhhh......
Jun 12, 2014 03:40 PM #14
I think its something to do with the locker and driveshaft. I cant see whats loose but thats what it feels like... Going to see if Andrew can take a look at it today. Going camping Friday Morn and need a rig to drive.
Jun 12, 2014 06:41 PM #15
Place your bets now on what stupid thing I missed than needed a quick fix. I'll find out in an hour if its a quick fix.
Jun 12, 2014 06:53 PM #16
You need a Hemi
Jun 12, 2014 08:45 PM #17
Chrome in the intake?
PCV valve put in upside down?
Wrong tranny mount?
Balls?
Someone inside tapping their foot?
PCV valve put in upside down?
Wrong tranny mount?
Balls?
Someone inside tapping their foot?
Jun 12, 2014 09:42 PM #18
Not a quick fix. There is a problem but nothing that jumped out. It could be a bunch of little things. Going to pull the front d-shaft and see if thats part of the issue. They said I need to do a new joint in the back shaft as well.
Shes just an old truck with problems.
#5 cyl has a miss
Trans leaks- may be going out.
Rear main leaks
ac
PS or gear box issue
Its all good
Shes just an old truck with problems.
#5 cyl has a miss
Trans leaks- may be going out.
Rear main leaks
ac
PS or gear box issue
Its all good