Got the new ViAir 450 continous air system withtank and hardware!!! But now I have to wait to put it in, had a wreck on the quad this weekend and broke ribs andmy left hip socket, no surgury needed cause it is a "non-displaced" fracture, just can't walk on it for six weeks!!



Specs:

For 37-inch tires & up:
Constant Duty Onboard Air System – (P/N 10007)
(1) 2.5 Gallon Air Tank
(1) 450C Compressor (100% Duty Cycle)
(1) 35-ft. Coil Hose with Clip-on Tire Chuck
(1) ¼” NPT Quick Connect Coupler (F)
(1) Dash Panel Gauge with ON/OFF Switch
(1) Pressure Switch with Relay (110 PSI-ON, 150 PSI-OFF)
(1) Reducer (1/8” NPT F to ¼”NPT M)
(1) ¼” NPT – 175 PSI Safety Valve
(1) ¼” NPT Drain Cock
(3) ¼” NPT Compression Fittings
(1) 4-inch Strip of Continuous Grommet Material
(1) 20-ft. section of 12 gauge wire with Inline Fuse Holder
(1) 3-ft section air line tubing for air filter relocation
(1) 30-ft section of air line for gauge plumbing, accessories

Wow cool new toy. Glad you are ok (not as bad as it could have been) from this weekend. You need anything?

No, I have a lot of people from the church that as soon as they heard that I went to the hospital they started the prayer chain and people started to help, lady is even bringing me a wheel chair later so i can get aound. We are blessed with some incredible friends nd church family, but thank you for asking!!!

Wowzer!
Glad your olden bones don't need too too much work. Sorry to hear about the wreck.

Glad to hear you're ok and no surgery is needed. Hope you heal up quickly!

nice air tank!

sorry to hear about the wreck on the quad? We know what happened to you but what about the atv? :wink:

Hope you get back on your feet soon!

Its fine, after it threw off the excess weight it righted itself and continued around till it rolled backwards on my chest hence the ribs!!!


All is good, there are SO many worse ways that this could have turned out, He still was watching over me

so hows the compressor working? Anything youd do differently now that youve had a chance to use it for a few weeks?

Actually have not put it in yet, since the wreck I haven't been able to work on the Jeep but I am Going to a friends this weekend to start the OBA install and alos work on Virgil's Jeep.

Since I can lay down with no problem, they have already decided that I get to do the underneath work like the speedo gear change and the lube!!!