wat do u guys think about tube fenders?(https://www.spydercustoms.com/index2.php) and stingers. (https://www.spydercustoms.com/index2.php) im thinking i like them both. oooo and i like these rocker gaurds cause they also act as a step with out loosing and ground clearance. (http://www.purejeep.com/products.php?cat=6&PHPSESSID=753f7ad9b1e9a06ed0d860328e8ef033)

Im not a fan of the step. You can't use it as a real step so whats the point. That being said. If you like it and its going on your Jeep... then get it.

Look at the end of page 3. If I was going t get rockers I would get these.
http://www.azvirtualjeepclub.com/showthread.php?t=1457&page=3

As for the fenders. I like em.
http://www.absoluteoffroadphx.com/servlet/the-248/Gen-dsh-Right-Boulder-Series-Tube/Detail
Not cheap but they hold up to the big rocks.

ok so im a fan of the rockers with the tubes on them. and how to i keep my side markers so i can be leagal

NJcrawler wrote:ok so im a fan of the rockers with the tubes on them. and how to i keep my side markers so i can be leagal

Most do a CJ style turn signal. Others do a LED in the fender. Some don't do any.

heres a set of flare fenders i did for a guy(2nd pic). he used the factory light just rewired them. then theres a pic(1st) of the tube fender and stinger bumper i did for a buddy

Ooo is number 2 Rich's Jeep? :cool)

yes it is. that was the first set of flares i did. the first pic is how i do the plates now. richs were fully welded on top and now i weld them underneath for a cleaner look. i took a lot away from building that flare set.

I just did the CJ signals under my head lights. However I just cut my entire fender off and put nothing on. If you use the wires for your side marker and not your actual turn signal then it wires right up.