Results 1 to 9 of 9

Thread: Leaking Air locker

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Nov 2010
    Glendale, AZ

    Default Leaking Air locker

    Need a little advice for a fix. I have a Grizzly air lockers installed and I noticed the other day that my front was leaking. Upon inspection, I noticed gear oil seeping from the top of the front diff. It appears to be coming from the bulkhead connector, where my air hose goes in.

    After talking with Geoff, I am to assume that I can press down on the air hose, press on the "push to fit" fitting and release the air hose. I assume that I should unscrew the Push to Fit fitting, apply some thread tape and screw it back in.

    Here's my question: Does the bottom bulkhead connector (that is screwed onto the diff) hold the inner air hose in place? I'm concerned that if I unscrew the Push to Fit fitting, the inner one air tube will fall into the diff. I would think that the O-ring would keep the inner hose from falling into the diff. Just not sure.

    How do I fix this?

    Name:  IMG_20140913_180121.jpg
Views: 463
Size:  268.9 KB

    Name:  install image.JPG
Views: 393
Size:  146.2 KB
    Last edited by 2ndchance; 09-17-2014 at 09:40 PM.
    2009 4-door JK - 85% daily driver, 15% hunting vehicle, 100% fun!

    It's better to be prepared, than scared.
    Mailman by day, Gun Nut by night.
    NRA Certified Instructor - 5 disciplines.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts